Design and Manufacture of DOEs
One typical diffractive optical element (DOE) design is a laser beam shaper. There are two main types of this design:
- Analytical beam shaper (also called top-hat beam shaper or flat-top beam shaper)
- Diffractive homogenizer (also called diffractive diffuser)
The analytical beam shaper modifies a highly coherent Gaussian incident beam (typically with M2 < 1.5) into an output beam with a well-defined spot shape with uniform intensity within the spot area and very sharp decay of the energy to nearly zero outside the spot. Typical spot shapes achievable with this beam shaper include:
- Round
- Square
- Rectangle
- Line
- Ring / Circle

Round diffractive diffuser vs. round diffractive top-hat beam shaper
The diffractive homogenizer provides a homogenous spot at any desired shape from a non-coherent laser beam with high M2. Typical output spot shapes include all the above shapes as well as any defined free-form shape desired by the customer.
Another typical diffractive optical element design is the diffractive beam splitter, also known as multispot. The multispot splits an incident laser beam into multiple channels with predefined arrangement and separations between the spots, as well as controlled intensity distribution between them.

Diffractive beam splitter with hexagonal spots arrangement
Design methods of diffractive optical elements
Holo/Or’s DOEs are designed using an in-house developed tool, enabling design optimization using the Iterative Fourier Transform Analysis (IFTA). IFTA is also known as the Gerchberg-Saxton algorithm. Using this unique function, optimized over many years for multiple applications, Holo/Or can design DOE phases that provide the best diffractive efficiency and uniformity.
The designed pattern is then transcribed into a digital file for lithographic manufacturing process of the elements. In this process, the pattern is written using direct write laser lithography and then dry etched in ICP/RIE plasma etching, to provide a monolithic element with excellent laser damage threshold (LDT) that is almost the same as that of the unpatterned optical substrate.
Their in-house production enables design-for-production that takes tolerances into account, allowing Holo/Or to simulate the performance of elements in their working environment, rather than just theoretical nominal performance. This enables Holo/Or to provide accurate specs that reflect real production tolerances, without the need for prototype production. This ensures that the NRE costs for custom elements are competitive compared to other diffractive manufacturers.
Holo/Or can manufacture diffractive optics on wafers up to 150 mm, including in-house dicing to dimensions as small as 2×2 mm, as well as working on batches of smaller elements such as 1” diameter windows . In addition to their high power monolithic elements, Holo/Or can produce on various substrates depending on system wavelength, power level and required volumes for production, including polymer on glass and plastic elements.
For more information about beam homogenizers and other Holo/Or products, contact Holo/Or.
(The original version of this item is a post on the Holo/Or website.)

