Real-Time Isotopic Monitoring in Nuclear Decommissioning with CF-LIBS
Monitoring tritium-bearing dust is an important safety challenge in nuclear decommissioning. Traditional methods such as liquid scintillation counting require physical sampling and chemical dissolution. This offline process can delay results by several days, particularly for refractory particles.
Recent research demonstrated a calibration-free laser-induced breakdown spectroscopy (CF-LIBS) approach for direct analysis of airborne cement aerosols, using deuterium as a non-radioactive surrogate for tritium. The published study is entitled, “Deuterium analysis in cement aerosols using CF-LIBS.”
The experimental setup incorporated an Aryelle Butterfly echelle spectrometer from LTB Lasertechnik Berlin coupled to a gated ICCD camera. Its combination of high spectral resolution and broad spectral coverage addresses a central requirement of CF-LIBS: distinguishing closely spaced isotope lines while accessing the emission features needed to determine plasma conditions and composition.
In this study, the hydrogen and deuterium Balmer-α lines are separated by approximately 170 pm. The recorded spectrum across 200–800 nm contained more than 3,000 emission lines. Using the MERLIN radiative transfer code, the researchers extracted quantitative elemental and isotopic information without matrix-matched calibration standards. Despite sparse aerosol sampling — with only a few particles vaporized per acquisition — the deuterium signal could be reliably identified and modelled.
The results represent a promising step towards direct, in situ monitoring of tritiated aerosols in nuclear decommissioning and future fusion facilities. Further validation and improvements in sensitivity remain necessary.
About LTB Lasertechnik Berlin
LTB Lasertechnik Berlin develops and produces laser processes, laser systems, and complete automation systems. These machines have proven themselves in a wide variety of locations: from clean rooms at pharmaceutical companies and research laboratories to production halls in the metalworking industry.
These products include:
For more information or a quotation for LTB products, contact IL Photonics.

