What is a Photodiode: A Complete Guide
Every optical measurement system, from a fiber optic receiver to a laser rangefinder, comes down to the same basic problem: turning light into an electrical signal that a circuit can read.
That conversion happens at a photodiode, a semiconductor device built around a p-n junction that generates a current proportional to the amount of light striking it.
Getting that conversion right and picking the device that does it best for a given design is what GPD Optoelectronics’s new resource page, “What is a Photodiode? A Complete Guide,” is built to teach.
Some of the topics covered by this guide include:
- Two operating modes, two different jobs – A photodiode can run in photovoltaic mode, generating a small voltage on its own with very low noise, or in photoconductive mode, applying a reverse bias that widens the depletion region and speeds up response time. This guide breaks down exactly when each mode earns its place in a design, and why most light-generated current originates in the depletion region.
- Four architectures, four different tradeoffs – PIN photodiodes are the workhorse of telecom and industrial sensing. Avalanche photodiodes generate internal gain through avalanche multiplication, turning a single absorbed photon into a cascade of electron-hole pairs to detect extremely low light levels. Schottky photodiodes swap the p-n junction for a metal-semiconductor junction to reach shorter wavelengths and faster response times. This guide walks through where each one belongs and how phototransistors fit into the picture as a lower-cost, lower-speed alternative.
- Position-sensing and specialty families most engineers never think to compare – Quadrant and tetralateral photodiodes track where a beam lands, not just how bright it is. Two-color detectors report two wavelengths from a single package. Low polarization-dependent loss InGaAs photodiodes hold their responsivity steady even as polarization drifts through a fiber link. The guide covers all four and explains the specific problem each one solves.
- Material choice sets the boundaries before a single spec gets compared – Silicon covers the ultraviolet through the near infrared at the lowest cost. InGaAs extends into the shortwave infrared and anchors telecom wavelengths at 1310 nm and 1550 nm. Germanium reaches similar infrared territory at a lower price, trading off higher dark current and slower speed. This guide lays out exactly where each material’s usable range starts and stops.
- The eight specifications that decide performance – Responsivity, dark current, noise equivalent power, bandwidth, quantum efficiency, junction capacitance, active area, and breakdown voltage all interact in ways a single headline number never captures. The guide explains what each one means in practice, and which ones matter most for a given application.
Read “What is a Photodiode? A Complete Guide” to gain an in-depth explanation, with direct links to the product families that match each device type and material system discussed along the way.
About GPD Optoelectronics
Founded in 1973, GPD Optoelectronics began by making high-quality germanium transistors, but since the early 1980s the company manufactures both germanium and indium gallium arsenide photodiodes and multi-element photodetectors. In addition to offering a variety of off-the-shelf products, GPD specializes in providing customized parts that are uniquely tailored to customer applications. GPD has the agility to design and deliver prototypes of custom products often within just a few weeks.
GPD’s products include:
- Photodiodes
- Position sensing photodiodes
- Specialty photodiodes
- Packaging Options
- Multi-Cell Photoreceiver (MCPR) Development Kits
To request more information or a quotation for these or other GPD products, contact IL Photonics.

